What Does It Mean When Your Car Says Service Theft Deterrent System?

How do you know if your car is in anti-theft mode?

If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem.

The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring..

How do I reset the security system on my car?

3 Tips to Reset Factory Car AlarmsClose all of your car doors.Insert one key in the door lock and cycle it to the “Lock” position, and then back to the “Unlock” position two times. … Enter your car and insert your key into the ignition cylinder.Cycle the key in the ignition from the “Off” position to the “On” position twice in a row.

What’s the best anti-theft device for a car?

Here are the best tools, devices and tips for preventing car theft in 2019.Steering Wheel Locks. … Tire & Rim Locks. … Car Part Protection. … Car Alarms. … Track Your Car With a GPS Device. … Kill Switches. … No-Cost Vehicle Theft Prevention Tips.Jan 22, 2021

How do I bypass immobilizer?

You can bypass the immobilizer by placing the key in keyhole hence deactivating the car’s immobilizer to remote start. The added security with Mobokey allows the security to be activated as soon as the phone moves away from the car, so you don’t have to worry about car security.

How do I know if my PASSLock is activated?

Most PASSLock-equipped vehicles have a telltale indicator in the instrument panel. When a PASSLock-equipped vehicle is being started, the instrument panel warning light for PASSLock remains on until the engine starts.

How do I reset my 2014 Chevy Silverado theft deterrent system?

To reset the anti-theft system in the 2014 Chevy Silverado, turn the key in the ignition to the “on” position and attempt to fire the engine. Return to the “on” position. The vehicle will not start if anti-theft has disabled the ignition. After 10 minutes, the flashing “security” warning light should power off.

How do I get my car out of anti-theft mode?

How To Shut Off Your Car’s Anti-Theft DeviceMethod 1: Check the cylinder and key. Step 1: Check the key fob battery. … Method 2: Turn on the ignition. If your engine has been locked up by the anti-theft system, you will be unable to start it. … Method 3: Insert the key into your car’s door. Step 1: Insert the key into the door lock.

What triggers theft deterrent system?

The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) … Charging alarm (electric vehicles only)

How do you reset a Chevy theft deterrent?

To reset the anti-theft system on the Chevy Silverado You will need to get into the car and lock the doors. Now with the doors locked put the key into the ignition and turn it to the on position. Let it sit there for 5 minutes until the anti-theft light blinks.

How much does it cost to reset anti-theft system?

The Best in Auto Repair The average cost for antitheft system diagnosis & testing is between $44 and $56. Labor costs are estimated between $44 and $56. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How do I get rid of service theft deterrent?

To deactivate the anti-theft system use the unlock button on the remote key. Unlock the driver’s door using the key and then switch the ignition switch to the on position. If that doesn’t work exit the vehicle and roll up all windows, then use the key to lock the driver’s door.

Can I drive with service theft deterrent?

If you are ever driving and the security light comes on and stays on, you will be able to restart your engine if you turn it off. The theft-deterrent system, however, is not working properly and must be serviced by your dealer. Your vehicle is not protected by the theft-deterrent system at this time.

What does it mean when the anti-theft light is blinking?

The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.

How do I get my car out of anti-theft mode without remote?

Resetting the AlarmClose all of your car doors.Insert one key in the door lock and cycle it to the “Lock” position, and then back to the “Unlock” position two times. … Enter your car and insert your key into the ignition cylinder.Cycle the key in the ignition from the “Off” position to the “On” position twice in a row.

Add a comment